Roofing is one of the most critical parts of the building journey; it comes with numerous risks for contractors and workers. Without the proper technique and equipment, you can encounter accidents while roofing and suffer injuries.

Some falls can be fatal or leave you paralyzed, explaining the need to follow the OSHA roof safety guidelines.


Follow These Roofing Safety Tips;


All roofing workers should have the necessary information on the dangers they are likely to encounter and maintain their safety while in hazardous situations. Every roof worker should receive training from qualified personnel.


Apply The PFAS

According to OSHA roof safety guidelines, a Personal Fall Arrest System is essential to ensure that in case of a fall from 6ft or higher, there are safety lines in place. The PFAS is designed to provide a safe landing by lowering the acceleration on your fall.


Fall Restraint System

Falls are the most common accidents during the roofing stage of construction. Therefore, a fall restraint system is necessary. You create restrictions and limits of how far you or another worker can reach along the edges of buildings to avoid falls along edges.


Use Guard Rails

Physical protection from falling off edges is a good safety measure to take as you install roofing on a tall building. Sometimes you can forget all about the limitations along the edges through the fall restraint system, but in such moments, the guard railing will save you from a fall.

Additionally, one can trip and fall along the edge without necessarily intending to be along the edges. For such situations, you will be thankful for the guard rails.


Having Warning Signs

Don’t ignore warning signs. When installing roofs on houses and buildings, you or your workers might be too engrossed in work that you forget about the pre-mentioned hazards. The warning signs will serve as a reminder of when and where you need to be more careful.


Use Unfaulty Ladders

Never go to a roofing site with a faulty ladder. Before you begin any roofing project, ensure that a qualified inspector, as required by the OSHA roof safety requirements, conducts a thorough inspection and clears the ladder as fit for work.


Have Protective Equipment

Always have protective gear while working on a roofing project. Ensure that all your workers also have Personal Protective Equipment to protect them from any dangers.

Protective equipment should protect you and your fellow workers from hazards related to their gadgets, work tools, and equipment that could pose a threat, such as nail guns and drill guns.


Action Plans In Case Of Emergencies

To ensure safety in roofing, ensure that you and your employees are equipped with first aid skills and you understand the next course of action after an accident; you know who to call.

Also, ensure that you and your workers know signs of occupational illnesses to avoid medical situations that turn fatal, like someone passing out due to high heat at the edge of a building causing injuries or a fatality.